Mostrar Mensajes

Esta sección te permite ver todos los posts escritos por este usuario. Ten en cuenta que sólo puedes ver los posts escritos en zonas a las que tienes acceso en este momento.


Mensajes - sisoffi

Páginas: [1]
1
Hi Ascanio,
in the meantime I understand if your new installer has a bug in the installation (written in the download post)
yesterday after some time I tried to put the dll for p43d v4.5 in modules with your suggested modification,
but it doesn't work and not even generate the Log file how can I do? i send you the INI data:

thankyou
Simone


; ==============================================
; ===IOCP4P3D 6.0 ========config file===========
; ==============================================
[General]
TCPPort=8090
Delay=40
LogLevel=2
Wait=500
uPnpAlias=P3D
ThreeValueForTrain=0

; ==============================================
[Offsets]
xml=iocpoffsets.xml
txt=maddog.txt

; ==============================================
// The VCInterface is no longar valid...
// Please refer to WEB to see the new way to load VC variables







2
Descargas / Re:New Download section on Menu
« en: Enero 08, 2020, 02:02:32 pm »
Hi,
i tried to install the new setup sioc server but in Run administrartor require dont start.
There is an issue in the installer?

Many thanks,
SImone

3
Hi Juan,
i tried but no log with all offset generated after start p3d.
Same problem...the maddog.txt is correct now.

OFFSET 5000
// CM1 ASI
VAR CM1_asi_needle1            // ias needle
VAR CM1_asi_needle2            // vmo needle
VAR CM1_asi_needle3            // salmon bug
VAR CM1_asi_needle4            // bug 0
VAR CM1_asi_needle5            // bug 1
VAR CM1_asi_needle6            // bug 2
VAR CM1_asi_needle7            // bug 3
VAR CM1_asi_needle8            // OFF flag
VAR CM1_asi_needle9            // A/S flag
VAR CM1_asi_strip1            // millesimi mach
VAR CM1_asi_strip2            // centesimi mach
VAR CM1_asi_strip3            // decimi mach
VAR CM1_asi_needle4_event         // spostamento bug 0
VAR CM1_asi_needle5_event         // spostamento bug 1
VAR CM1_asi_needle6_event         // spostamento bug 2
VAR CM1_asi_needle7_event         // spostamento bug 3


....


4
Hi Juan,
ok i will try.
So why the log file is not generate?

i hav it but nothing read inside the log.

thanks,
Simone


5
thank you Juan,
i will attend your reply.

Simone

6
hi Juan,
i noted now that VCinterface are no loneger available.
For the maddogX how is the correct procedure to read the file?

i tried this string but no work.

; ==============================================
[Offsets]
xml=iocpoffsets.xml
txt=maddog.txt


Thanks,
Simone


7
Hi Ascanio, i only reinstall gsx +sode and now work again ok.
For some strange reason gsx or sode caused conflict to iocp.dll
Many thanks

8
another thing is when i clean LOG it doesnt generate nothing! remain only:

IOCP4P3D 3.1 log file.
by Ascanio (http://www.iocpserver.net)

visualstudio perfect (Explorer work perfect)
wread and write permissions ok on all module and all files.
is incompatible with last version 3.4 (but until some few days ago worked)

i dont know why if i leave only iocp inside problem remain is not other conflicts with dll.

Simone

9
I don't known if is ivao the problem but for any strange reason don't work, visual studio reinstalled, write permissions ok, offsets work but p3d start on bar  :-[

10
hi Ascanio,
again problem with iocp, i dont know why but again this problem
i leave iocp3.dll and work

i install the A2A accu feel there are these 2 new dll.

this is my dll:

<?xml version="1.0" encoding="Windows-1252"?>

<SimBase.Document Type="Launch" version="1,0">
  <Descr>Launch</Descr>
  <Filename>dll.xml</Filename>
  <Disabled>False</Disabled>
  <Launch.ManualLoad>False</Launch.ManualLoad>
  <Launch.Addon>
    <Name>Widetraffic</Name>
    <Disabled>False</Disabled>
    <Path>Widetraffic\widetraffic.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>WidevieW</Name>
    <Disabled>False</Disabled>
    <Path>WidevieW\wideview.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>Fly the Maddog</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>Modules\LeonardoSH.dll</Path>
  </Launch.Addon>
<Launch.Addon>
    <Name>IOCP DLL</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>Modules\Iocp4P3D.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>A2A Feel</Name>
   <Disabled>False</Disabled>
   <Path>Modules\A2A_Feel.dll</Path>
   <DllStartName>module_init</DllStartName>
   <DllStopName>module_deinit</DllStopName>
  </Launch.Addon>
  <Launch.Addon>
   <Name>AccuFeelMenu</Name>
   <Disabled>False</Disabled>
   <ManualLoad>False</ManualLoad>
   <Path>Modules\AccuFeelMenu.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>FSUIPC 4</Name>
    <Disabled>False</Disabled>
    <Path>Modules\FSUIPC4.dll</Path>
  </Launch.Addon>
</SimBase.Document>

11
Preguntas y respuestas / Re: P3D starts and then nothing, no more display
« en: Febrero 18, 2017, 02:50:51 pm »
Hi Ascanio,
thank you for your support.
I installed the visual studio as susggested all work now perfect.

Many thanks,
Simone

12
Preguntas y respuestas / Re: P3D starts and then nothing, no more display
« en: Febrero 16, 2017, 08:10:53 pm »
nothing Ascanio,
i leave log file and when start p3d close and dont generate iocp.log

incredible  :'(

13
Preguntas y respuestas / Re: P3D starts and then nothing, no more display
« en: Febrero 16, 2017, 10:50:37 am »
Ascanio,
I join this thread because I have the exact same problem.
I tried with the latest DLL_4007 but apparently the problem persists.

The only change I made was to switch from win7 64bit win10 if this can serve to help you to understand what happen
on Skylake I7 6700 platform.


thanks,
Simone

14
Errores detectados / Re:Iocp.dll crash in p3d 3.4
« en: Febrero 12, 2017, 11:53:43 am »
Hi Juan,m
thank you, i will try this dll and will report.

Simone

15
Errores detectados / Iocp.dll crash in p3d 3.4
« en: Febrero 09, 2017, 10:51:08 pm »
Hi,
I come to a new pc with win10 64bit. Before I hade no problems with win7 and use the iocp.dll with p3d 3.4
Now with iocp assign in appdata/dll p3d 3.4 and the last fsuipc 4.60 prepar3d when lanch crash.
There is some incompatibilities with these new versions?
If I leave the lines of iocp.dll inside Dll prepar3d start perfect.

Many thanks for your help
Simone

Páginas: [1]